Ip4Ww-2Bridb-C1; Ip4Ww-1Priu-C1; Optional Interface Cards; Ip4[ ]-Memdb-C1 - NEC SL1100 Hardware Manual

ISSUE 4.1 (R5.1)

2.2.5 IP4WW-2BRIDB-C1

The 2BRIDB provides two ISDN (Basic Rate) circuit and is
mounted on the 084M, 080E, 008E or 000E card. A total of
three 2BRIDBs can be installed per system.
• Mount this board onto the 084M, 080E, 008E or 000E
card.
• Supports T/S point connection (Hard-switch).
• All ISDN circuits are not supplied with DC power from the
system.

2.2.6 IP4WW-1PRIU-C1

The 1PRIU is installed in the 1228M KSU providing for an
ISDN Primary Rate Interface. A total of one 1PRIU can be
installed per system.
• Install this card to the expansion card slot at Main KSU.
• Supports T/S point connection (Hard-switch).

2.3 Optional Interface Cards

2.3.1 IP4[ ]-MEMDB-C1

This card provides additional expansion memory. Following memories are equipped on this card.
Memory Type
SDRAM
Flash Memory
The MEMDB is mounted on the CPU card and provides the
SDRAM and Flash Memory required by the following:
• VoIP
• CTI
• VRS and InMail Channel Increment above 8 channels.
• Virtual Loopback
• InMail Email Notification

2.3.2 IP4WW-VOIPDB-C1

The VOIPDB-C1 card provides the RTP/RTCP voice
processing function.
• Mount this card onto the CPU card (VoIPDB slot) at Main
KSU.
• Max. 32 channels by license control. (V5.1 or higher)
Hardware Manual

Table 1-1 Memory Capacity of MEMDB-C1

Capacity
64 MB
32 MB
SL1100
1-5