Toyota Prius Prime 2015 Owner's Manual page 132

1. VOICE COMMAND SYSTEM OPERATION
 Selecting
or saying "Help"
prompts voice guidance to offer exam-
ples of commands and operation meth-
ods.
3
Say the command displayed on the
screen.
 Registered POIs, registered names in the
contacts list etc., can be said in the place
of the "<>" next to the commands.
(→P.138)
For example: Say "Find nearby dining",
"Call John smith" etc.
 If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
 To
cancel voice recognition,
, or press and hold the talk switch.
INFORMATION
●
If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
●
"Voice Recognition Prompts" can be set
on the "Voice Settings" screen. (→P.70)
●
Some voice guidance can be canceled
by setting voice prompts to off. Use this
setting when it is desirable to say a com-
mand immediately after pressing the talk
switch and hearing a beep.
132
■
DISPLAYING THE "Voice Settings"
SCREENS
 Selecting
"Voice Settings" screen. In this case, the
voice command system will be finished.
(→P.70)
select
PRIUS PRIME_Wide Navi_OM47B68U_(U)
can be displayed the
16.07.28 10:17