Toyota Prius Prime 2015 Owner's Manual page 214

1. BASIC OPERATION
■
DISPLAYING PREDICTIVE
CIENT DRIVE INFORMATION
The icon for the predictive deceleration
support point can be displayed on the
map.
1
Display the "Map Information" screen.
(→P.211)
2
Select "Predictive Efficient Drive".
 The "Predictive Efficient Drive" indica-
tor illuminates.
 The
icon is displayed on the map for
the predictive deceleration support points.
Also, when the position of the vehicle
approaches the predictive deceleration
support point, the icon changes to a
INFORMATION
●
Up to 100 icons can be displayed on one
screen.
●
When the maximum number of icons
that can be displayed is exceeded, the
predictive efficient drive points near the
position of the vehicle are displayed.
●
Icons for the predictive efficient drive
points can be displayed on maps more
detailed than 0.75 miles. (excluding the
city map)
●
When a destination is set, predictive
deceleration support points not along
the guided route are not emphasized.
214
■
EFFI- TURNING OFF THE PREDICTIVE
EFFICIENT DRIVE INFORMATION
DISPLAY
1
Display the "Map Information" screen.
(→P.211)
2
Select "Predictive Efficient Drive".
 The "Predictive Efficient Drive" indica-
tor dims.
 After the "Predictive Efficient Drive"
function is turned off, the screen to con-
firm whether to clear the predictive effi-
cient drive point information is displayed.
To clear a registered point, select "Yes".
To not clear the point (only remove the dis-
played icon), select "No".
INFORMATION
.
●
Once the predictive deceleration support
point information is cleared, it cannot be
restored.
●
The predictive deceleration support
point information cannot be selected and
individually cleared.
PRIUS PRIME_Wide Navi_OM47B68U_(U)
16.07.28 10:18