Verifying Control Plane Services - Cisco ASR 920 Series Configuration Manual

Control Plane Policing
Command or Action
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
control-plane
Example:
Device(config)# control-plane
Step 4 service-policy inputpolicy-map-name
Example:
Device(config-cp)# service-policy input
control-plane-policy
Step 5
end
Example:
Device(config-cp)# end

Verifying Control Plane Services

SUMMARY STEPS
1. enable
2. show policy-map control-plane [all] [input [class class-name]]
3. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show policy-map control-plane [all] [input
[class class-name]]
Purpose
Enters global configuration mode.
Enters control-plane configuration mode (which is a prerequisite
for defining control plane services).
Attaches a QoS service policy to the control plane.
• input—Applies the specified service policy to packets
received on the control plane.
• policy-map-name—Name of a service policy map (created
using the policy-map command) to be attached.
(Optional) Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays information about the control plane.
• all—(Optional) Displays service policy information about all QoS
policies used on the CP.
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
Verifying Control Plane Services
37