Cisco ASR 920 Series Configuration Manual page 47

Control Plane Policing
Command or Action
Step 11 conform-action action
Example:
Device(config-pmap-c-police)# conform-action
transmit
Step 12
exit
Example:
Device(config-pmap-c-police)# exit
Step 13 exit
Example:
Device(config-pmap-)# exit
Step 14 control-plane
Example:
Device(config)# control-plane
Step 15
service-policyinput policy-map-name
Example:
Device(config-cp)# service-policy input
Policy1
Step 16 exit
Example:
Device(config-cp)# exit
Step 17 exit
Example:
Device(config)# exit
Configuring Control Plane Policing to Mitigate Denial-of-Service Attacks
Purpose
• conform-action action— (Optional) Specifies action to
take on packets that conform to the specified rate limit.
• pir pir-bps—(Optional) Specifies the peak information
rate (PIR).
cir percent percent option is not supported on the
Note
router.
(Optional) Specifies the action to take on packets that conform
to the police rate limit and enters policy-map class police
configuration mode.
Exits policy-map class police configuration mode
Exits policy-map class configuration mode
Enters control plane configuration mode.
Attaches a policy map to a control plane.
Exits control plane configuration mode and returns to global
configuration mode.
Exits global configuration mode returns to privileged EXEC
mode.
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
41