Back Panel Model Xs716T - NETGEAR XS708T Hardware Installation Manual

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch
accept copper or fiber modules. You use either port 15T or port 15F, and similarly, either port 16T or port
16F. Each copper RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the
link partner automatically.
The following figure shows the front panel of the model XS716T.
Figure 5. Front panel model XS716T
Number Description
1 Power and Fan LEDs.
2 Recessed Reset button to restart the device.
3 Recessed Factory Defaults button to restore the device back to the factory defaults.
4 Sixteen RJ-45 connectors for 100M/1G/10G AutoSensing 10-Gigabit Ethernet
switching ports.
5 Two of these ports (15 and 16) are combo ports: You can either use ports 15T and
16T as Gigabit Ethernet switching ports or you can install copper or fiber modules
in 1G or 10G SFP+ slots 15F and 16F.
6 Speed and activity (ACT) LEDs for each port.
7 One USB 2.0 port for firmware uploads or configuration settings file uploads and
downloads (backup) using a USB storage device (supports FAT32 and VFAT file
systems only).

Back Panel Model XS716T

The following figure shows the back panel of model XS716T.
Figure 6. Back panel model XS716T
Number
1
2
3
Description
Serial console (note for customer use)
Kensington lock slot
AC power connector
Hardware Overview
16