System And Port Leds Model Xs716T; Switch Hardware Interfaces - NETGEAR XS708T Hardware Installation Manual

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch

System and Port LEDs Model XS716T

The following table describes the RJ-45 and SFP+ slot LED designations. Each RJ-45 port provides a left
LED and a right LED and each SFP+ slot provides two LEDs.
Table 3. LEDs on switch
LED Description
Power LED
•
•
•
Fan LED
•
•
Speed and ACT
LEDs for copper
•
ports 1 to 16
•
•
•
•
Speed and ACT 10G LED:
LEDs for SFP+
slots 15F and 16F
•
•
•
1G LED
•
•
•

Switch Hardware Interfaces

The following sections describe the hardware interfaces on the switch.
Solid green. The device is powered on.
Solid yellow. The device is booting.
Off. Power is not supplied to the device.
Solid yellow. The fans have failed.
Off. The fan is operating normally.
Off: No link is established.
Solid green: A valid 1000 Mbps link is established.
Blinking green. The port is transmitting or receiving
packets at 1000 Mbps.
Solid yellow. A valid 10 or 100 Mbps link is established.
Blinking yellow. The port is transmitting or receiving
packets at 10 or 100 Mbps.
Off: No SFP+ module link is established.
Solid. A valid 10 Gbps link is established.
Blinking. The SFP fiber port is transmitting or receiving
packets at 10 Gbps.
Off. No SFP+ module link is established.
Solid. A valid 1 Gbps link is established.
Blinking. The module is transmitting or receiving packets
at 1 Gbps.
Hardware Overview
17