Manual Tv Channel Search; Satellite Receiver - Philips 14PV350/07 Owner's Manual

Manual TV channel search

In certain cases the 'Automatic TV channel search' may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a
Press the button on the remote control. The main
MENU
menu will appear.
Select the line 'MANUAL SEARCH' with the
b
button and confirm with the
;P q
MANUAL SEARCH
PROGRAMME NUMBER
FREQUENCY
DECODER
EXIT: MENU
In the line 'PROGRAMME NUMBER', select the function
c
with the buttons
QSr
number buttons ' ' on the remote control to select the
0..9
desired programme number, e.g.: 'P01'.
d
Select the line 'FREQUENCY' with the menu buttons
or .
=P r ;P q
e
Enter the frequency of the desired TV channel with the
number buttons .
0..9
D If you don't know the frequency of the desired TV
channel, press
SqP
start the automatic search.
Repeat automatic search until you have found the
desired TV channel. A changing frequency number
will appear on the TV screen.
f
If you want to allocate a decoder, in line 'DECODER'
select 'ON' using the button
g
To store the TV channel, press
briefly appear on the TV screen.
D If you would like to search for more TV channels,
start again at step
=P r
button.
SqP
P01
W X
754
OFF
STORE: OK
or or use the
SqP
in line 'FREQUENCY' to
.
SqP
. 'STORED' will
OK
b
.
h
To end, press the

Satellite receiver

You can receive channels from the satellite receiver via the
scart socket .
EXT
a
To do this, select the channel number 'E1' using the
or button on the remote control. You will have to select
0
the channels to be received by the satellite receiver on
the receiver itself.
b
Use the number buttons
select the channels on the TV-Video Combi.
button.
MENU
on the remote control to
0..9
7