Connecting The Cables; Connecting A Decoder Or Other Equipment - Philips 14PV350/07 Owner's Manual

Connecting the cables

a
Insert the aerial plug into the
b
Insert the plug of the mains cable into the wall socket.
c
If the little red standby light (
of the set is not lit, please switch on the set using the
main power switch. The power switch
the left side panel of the set.
This text will appear on the TV screen.
IF YOU HAVE CONNECTED
THE AERIAL -
PRESS OK
d
Then, read the section 'Initial installation' in the chapter
'INSTALLING YOUR VIDEO RECORDER'.
socket.
2
STANDBY 5 ) at the front panel
is located on
8

Connecting a decoder or other equipment

You can also connect additional equipment to the
socket; for instance, a decoder, satellite receiver or
camcorder.
D The respective scart socket is usually marked 'AV'
or 'VCR' on the decoder or satellite receiver.
EXT
5