Table of Contents
Advertisement
7.
PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
The TV-Video Combi requires the following information for
each programmed recording:
* the date you want to make the recording
* the programme number for the TV channel you want to
record
* the start and stop time of the recording
The TV-Video Combi stores all above mentioned information in
a so-called TIMER-Block. You can programme up to 6 TIMER
blocks a whole month in advance.
'VPS' (Video Programming System) /
'PDC' (Programme Delivery Control)
With 'VPS/PDC', the TV station controls the start time and the
length of the programmed recording. If a TV programme
begins earlier or ends later than planned, the TV-Video Combi
switches on and off at the right time.
You must enter the start time exactly to the minuteduring
programming.
If you would like to programme a time that differs from the
VPS/PDC time, you must switch off 'VPS/PDC'.
Programming a recording
(with 'VIDEO Plus+')
When entering the PlusCode programme number, the
TV-Video Combi receives all necessary information to
programme a recording.
a
Press the
button on the remote control.
TIMER k
b
Enter the entire PlusCode number. This number which
can consist of up to nine digits, is listed in your TV guide
next to the start time of the respective TV programme.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
20
D If you make a mistake, you can clear your entry
using the
CLEAR (CL)
VIDEO PLUS+
PLUSCODE NUMBER
53124----
REP.: SELECT
TIMER LIST: TIMER
c
Use
to select repeated daily or weekly recording.
SELECT
'ONCE': One-time recording.
'MO-FR': Daily recordings from Monday through Friday.
'WEEK.': Recordings on the same day every week.
d
Confirm with the
button. Upon confirmation the
OK
respective information will appear on the TV screen.
TIMER PROGRAMMING
DATE REP.
PROG.
01 ONCE
01
REP.: SELECT
D If 'SELECT PROG. NR.' appears on the screen,
the TV channel has not yet been allocated to the
PlusCode number. Select the desired programme
number using the number buttons
remote control and confirm with the
D If 'PLUSCODE NUMBER NOT VALID' appears on
the screen, the PlusCode number is incorrect.
Correct your entry or cancel using the
D If 'MO-FR PROGRAMMING NOT POSSIBLE
FOR WEEKEND' appears on the TV screen, you
have programmed a daily recording for the wrong
day. Daily programming can only be used for
recordings to be made from Monday to Friday.
button.
REP.
ONCE
STORE: OK
VPS
START PDC
END
20:15
]
21:30
STORE: OK
on the
0..9
button.
OK
button.
MENU
Hide quick links:
Advertisement
Table of Contents
