Table of Contents
Advertisement
6.
MANUAL RECORDING
Use the 'Manual recording' function to spontaneously start
recording (e.g. to record a TV show already in progress).
E Please refer to section 'Recording without automatic
switch-off', if you want to manually start and stop your
own recording.
E Please refer to section 'Recording with automatic
switch-off', if you would like to start your own recording
but want it to end automatically (e.g. not to record all the
way to the end of the cassette).
Recording without automatic switch-off
a
Place a cassette in the machine.
b
Use the button
;P q
programme number which you would like to record from,
e.g. 'P01'. This picture will appear on the screen:
P01
D If a TV channel sends a channel name, this is
displayed on the screen.
D Programme number 'E1' is provided for recording
from external sources (via the
Programme number 'AV' is for recording from the
audio and video front sockets.
c
To record the TV programme, press the button
RECORD n
on the remote control or the button
TV-Video Combi.
D During recording, the recording lamp '
the front of the machine lights up. The following will
appear on the screen:
P01
D Use the button
OK
position on the screen.
d
Stop recording with the
18
or
to select the
=P r
1:20
TIME USED
scart socket).
EXT
n
on the
RECORD 5
1:20
TIME USED
to display the current tape
button.
STOP h
D If you would like to turn off the screen during the
recording, press the button
D To switch the screen back on again, press the
button.
;P q
D With the screen switched off you can only stop a
recording in process by pressing the button
STANDBY m
D During a recording you can also switch to other TV
channels.
Recording with automatic switch-off
(OTR one-touch-recording)
a
Place a cassette in the machine.
b
Use
or
;P q
of the TV channel you wish to record.
c
Press the
RECORD n
d
Press the
RECORD n
times to add 30 minutes to the recording time.
D To cancel this entry, press the
D The recording time can be extended only to up to 4
hours.
Protecting your recordings
So that you don't accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
' on
again with sticky tape or slide the special tab to the right.
.
STANDBY m
for more than 3 seconds.
to select the programme number
=P r
button on the remote control.
button on the remote control several
CLEAR (CL)
button.
Hide quick links:
Advertisement
Table of Contents
