Temperature Display; Flame Height; Blower Speed; Night Light Dimmer Control - Napoleon GDS26P-1 Installation And Operating Instructions Manual

38
8.3

TEMPERATURE DISPLAY

A. With the system in the "OFF" position, press the
EN
Temperature Key and the Mode Key at the same
time to change from degrees F to C.
B. Look at the LCD screen on the Transmitter to
verify that a C or F is visible to the right of the
Room Temperature display.
8.4

FLAME HEIGHT

The remote control has six (6) fl ame levels. With the
system on and the fl ame level at the maximum, press
the Down Arrow Key once and it will reduce the fl ame
height by one step until the fl ame is turned off.
The Up Arrow Key will increase the fl ame height each
time it is pressed. If the Up Arrow Key is pressed while
the system is on but the fl ame is off, the fl ame will
come on the high position. A single "beep" will confi rm
reception of the command.
8.5

BLOWER SPEED

If the appliance is equipped with a hot air circulating fan,
the speed of the fan can be controlled by the remote
system. The fan speed can be adjusted through six speeds.
A. Use the Mode key to guide you to the fan control icon.
B. Use the Up/Down Arrow keys to turn ON/OFF or
adjust the fan speed. A single "beep" will confi rm
reception of the command.
NOTE: When the desired blower speed is selected, the blower will automatically come on 5 minutes
after the main burner has been turned on and remain on twelve minutes after it has been turned off.
8.6

NIGHT LIGHT DIMMER CONTROL

The auxiliary function controls the Night Light
dimmable control.
A. Use the Mode Key to guide you to the Night
Light icon.
B. The intensity of the output can be adjusted
through 6 levels. Use the UP/DOWN arrow
keys to adjust the output level. A single beep will
confi rm reception of the command.
W415-2183 / B / 02.10.17
73
OFF
FLAME OFF
FLAME AT LEVEL 5
76 76
68 68
with
TM
76
OFF
23
°F
35.5A
76 76
°F
FLAME AT LEVEL 1
76
76
°F
Hi
FLAME AT "HI" LEVEL 6
35.8A
76
°F °F
Hi Hi
35.9B
76
°F
35.21
°C
°F
°F
76
°F °F
°F