Table of Contents
Advertisement
Technical Data
9.3 Input
Cable
for connection between conditioner card and
integrator
Cable
for connection between LVDT and LVDT condi-
tioner card when remotely or integrator mount-
ed
Belden is a registered trademark of Belden Wire & Cable Company.
1
6 conductor cable to be used with SIWAREX FTC.
2
9.3
Input
Power
± 5 V DC (typically from a Siemens integrator)
LVDT conditioner card
Input
0 to 0.75 V AC from LVDT
LVDT conditioner card
9.4
Output
Output
0 to 50 mV DC to Siemens integrator; maximum 300 m (1000 ft) separation between conditioner
LVDT conditioner card
card and integrator
Output
0 - 0.75 V AC @ 2.9 kHz
LVDT
LVDT excitation
2.50 V AC @ 2.9 kHz (supplied by integrator or LVDT conditioner card)
9.5
Operating conditions
Ambient temperature
-40 to +60 °C (-40 to +140 °F)
-40 to +50 °C (-40 to +122 °F) with optionally internally mounted LVDT card
40
Belden
8404, 4 conductor, shielded
®1
20 AWG (0.5mm
) or equivalent
2
Belden 9260, 6 conductor
, shielded 20 AWG
2
(0.5 mm
) or equivalent
2
Belden 9260, 6 conductor, shielded 20 AWG
(0.5 mm
) or equivalent
2
150 m (500 ft)
maximum
300 m (1000 ft)
maximum
300 m (1000 ft)
maximum
Operating Instructions, 02/2016, A5E32880290-AB
SITRANS WFS320
Advertisement
Table of Contents
Troubleshooting
