Sensing Plate - Siemens SITRANS WFS320 Operating Instructions Manual

Installing/mounting

4.2 Sensing plate

4.2 Sensing plate
1. Open the flowmeter housing access door.
2. With the sensing head cover removed, remove the taper pin.
3. Insert the sensing plate shaft fully into the sensing head socket.
Note
Ensure that the sensing plate shaft is installed with the flat side up.
4. Insert the taper pin (flat side down), from the left side.
5. Tighten the right taper pin nut to lock the sensing plate shaft in place.
6. Tighten the left taper pin nut.
①
②
14
Taper pin (flat side down)
Shaft
③
Socket
④
Flat side up
Operating Instructions, 02/2016, A5E32880290-AB
SITRANS WFS320