Table of Contents
Advertisement
4.3
Viscous damper
1. Remove the two damper cover shipping screws. The damper cover will be held up by a
spring.
2. If necessary, top up the damper to near overflowing with the damping fluid supplied.
3. Store the damper cover shipping screws, remaining damper fluid, and filler bottle for future
use.
Note
The damper must be full and free of air bubbles, with the damper cover in the UP
position, during flowmeter operation.
①
②
③
SITRANS WFS320
Operating Instructions, 02/2016, A5E32880290-AB
Filler bottle
Filler plug
Shipping screws
④
Damper cover
⑤
Check that there are no bubbles
Installing/mounting
4.3 Viscous damper
15
Advertisement
Table of Contents
Troubleshooting
