Printer Setup - Hach Lange DR 3900 User Manual

Interfaces
USB (Type A)
USB (Type B)
Ethernet
5.2.7.1

Printer setup

transferring data to a PC and in a network. These interfaces can
be used for the connection of a USB stick, an external USB
keyboard or a USB Barcode handset scanner.
Note: Various accessories can also be connected simultaneously using
a USB hub.
A USB memory stick is used to update data, refer to
section 6.8.2, page
Note: A shielded USB cable must not be longer than 3 m!
Table 3 USB connector
Description
This USB port can be used to connect a printer, a USB memory stick or a keyboard.
This USB port is only intended for the connection of the DR 3900 to a PC (with installation of the
corresponding software).
The Ethernet port is intended for data transfer to a PC without installed software or in a local
network . Only use a shielded cable (e.g. STP, FTP, S/FTP) with a maximum length of 20 m for
the Ethernet port.
1. Press PC & Printer in "Instrument Setup".
2. Press Printer.
3. Press Setup to display the Printer Setup screen.
111.
A list with information about the connections opens.
Standard programs
37