Onboard Indicators - Supermicro SUPERSERVER 5018D-FN8T User Manual

SUPERSERVER 5018D-FN8T User's Manual
5-9

Onboard Indicators

LAN LEDs
Each Ethernet port has two LED indicators.
One shows activity when flashing. The
other LED indicates the speed of the
connection. See the table on the right for
a description.
10G LAN Activity LED
The Activity LED for LAN7 is located at
LEDT2, and the Activity LED for LAN8 is
located at LEDT4. The LEDs blink when
the LAN is active.
10G LAN Link Status LED
The Link status LED for LAN7 is located at
LEDT1, and the Link status LED for LAN8
is located at LEDT3. When the LEDs are
on, the LAN is working properly.
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDM1. See the table on the right for a
description.
Onboard Power LED
An Onboard Power LED is located at
LED3 on the motherboard. When this LED
is on, the system is on. See the table on
the right for a description.
Color
Off
Amber
Green
Activity LED
5-20
Link Speed LED States
Definition
No Connection or 10 Mbps
1 Gbps
For LAN 1-6: 100 Mbps
Link Speed LED
LEDT1
LEDT3
LEDT2
BMC Heartbeat
LED States
Color/State Definition
Green: Blinking BMC: Normal
Onboard PWR LED Indicator
LED States
Color Definition
Off System Off (PWR cable
not connected)
Green System On
LEDT4