During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue the boot-up procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
Note: A PC buzzer must be installed using JD1 to hear the BIOS error beep
codes.
Beep Code
1 beep
5 short beeps + 1 long
beep
8 short beeps
OH LED On
Appendix A
BIOS POST Error Codes
BIOS POST Error Codes
Error Message
Refresh
Memory error
Display memory
read/write error or
no video
System Overheat
A-1
Appendix A: BIOS POST Error Codes
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
Video adapter missing or with
faulty memory
System overheat