Motherboard Features; Processors; Memory; Serial Ata - Supermicro SUPERSERVER 5018D-FN8T User Manual

SUPERSERVER 5018D-FN8T User's Manual
1-2

Motherboard Features

The SuperServer 5018D-FN8T is built around the X10SDV-TP8F, a single processor
motherboard designed to provide maximum performance. Below are the main
features. (see Figure 1-1 for a block diagram)

Processors

The motherboard supports a single Intel Xeon D-1518 four Core 35W embedded
processor.

Memory

The motherboard has four DDR4 slots that can support up to 128 GB of ECC RDIMM
or 64GB ECC/Non-ECC UDIMM with a max data rate of 2133MHz.

Serial ATA

The system supports up to four SATA3 (6Gbps) 2.5" hard drives or one 3.5" drive.
It also includes one SATA DOM (Disk on Module) power connector.

Input/Output Ports

Externallly accessable ports include eight LAN ports--six RJ-45 at 1GbE speed,
and two SFP+ 10GbE, plus a dedicated IPMI LAN port. The system also offers two
USB 3.0 ports, and a VGA port.
The motherboard includes four USB 2.0, one USB Type-A header, and a serial
port header.

PCI Expansion Slots

The motherboard supports:
•
One M.2 PCIe 3.0 x4 Slot, M Key for SSD, SATA 3.0 support (Mux with I-SATA4)
•
One Mini PCIe 2.0 x1 slot with mSATA support (Mux with I-SATA5)
1-2