Connector/Plug; Trainer - FUTABA 14SG Instruction Manual

Connector/Plug

Trainer

Connector
Earphone
Plug
Connector for trainer function
When you use the trainer function, connect the
optional trainer cable between the transmitters
for teacher and student.
*You can set the trainer function on the Trainer Function
screen in the System menu.
S.BUS connector (S.I/F)
When setting an S.BUS servo and telemetry
sensor, connect them both here.
(Supply power by 3-way hub or Y-harnesses.)
Earphone plug
It is not used now. (The function after upgrade)
S.BUS (S.I/F)
Connector
Charge
Plug
Connector for battery charger
This is the connector for charging the NiMH
battery HT5F1800B that is installed in the
transmitter. Do not use any other chargers except
the attached special charger corresponding to
NiMH battery.
*If you take out the NiMH battery HT5F1800B from the
Warning
Do not connect any other chargers except
the special charger to this charging
connector.
transmitter, you can use the optional quick charger CR-
2000 corresponding to NiMH battery.
<Before Use> 21