Table of Contents
Advertisement
4. Use a small Phillips screwdriver to adjust the
spring strength as you prefer by turning the
adjusting screw of the stick you want to
adjust.
*Turning the screw clockwise increases the tension.
CAUTION: If you loosen the screw too
much, it can interfere with the operation of
the sticks internally.
•Stick Tension (J2)
(Mode 2)
•Stick Tension (J1)
(Mode 1/2)
T h e s t i c k c a n b e
adjusted to how
quickly it returns to
neutral.
+ screw is clockwise.
+ screw is counter-clockwise.
Stick tension maximum
Stick tension minimum
*The screw will touch the case.
*The screw will touch the case.
18
<Before Use>
5. At the end of adjustment, re-install the side
•Stick Tension (J4)
(Mode 1/2)
•Stick Tension (J3)
(Mode 1)
A screw is kept
A screw is kept
from coming out
from coming out
from a line.
from a line.
cover and rear grips.
Advertisement
Table of Contents
