External Power Connections; Mounting The Device - VeriFone UX300 Installation Manual

NOTE
External Power
Connections
To connect to an
external power outlet
Mounting the
Device
CAUTION
NOTE
To mount the unit
To protect against possible damage caused by lightning strikes and electrical
surges, VeriFone recommends installing a power surge protector.
The UX300 connects to an external power outlet through a 4-pin interconnect
cable (VPN - CBL159-308-01-A) or a 6-pin interconnect cable
(CBL159-309-01-A). The connection depends on your specific card reader
configuration.
For more information regarding your card reader configuration, contact your local
VeriFone service provider. For cable ordering information, see
Documentation).
Connect the 4- or 6-pin interconnect cable to the external power port on your
device and the other end to an external power outlet.
Figure 9 Sample Connection to an External Power Source
The card reader and controller is designed to be flush-mounted to the mounting
surface, without further need for any external mounting devices.
For proper operation of the security switches, no additional gaskets or washers
may be used, except for the ones provided to you.
Ensure that your mounting frame has a thickness of 2 mm.
Your mounting surface may have different installation instructions. Refer to your
mounting device's user guide for further instructions.
1
Peel off the plastic liner from the front of the unit.
2
Align the reader's stud holes with the holes of your mounting surface.
UX300 M C R
ANUAL ARD EADER
S
ETUP

Mounting the Device

Accessories and
21
I G
NSTALLATION UIDE