NOTE
Top Functions •
Installing or
Replacing SAM
Cards
CAUTION
To install or replace
SAM cards
•
PSTN
•
ISDN
•
RS-485
•
Printer COM
•
PSTN_RJ9
•
485_3pin
Some or none of the model-dependent may be present on your unit and in the
model depicted in
Figure
SAM cardholder cover
•
Additional service switch
You may need to install a security access module (SAM) card or replace the old
card. The manual card reader and controller has 2 (two) SAM slots, which are
located under a removable protective cover.
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Power down the device.
2
Disconnect the device from any external devices.
3
Gently slide the SAM cardholder cover away from the unit, off the top panel.
Figure 4
Removing the SAM Cardholder Casing
4
Open the SAM cardholder, by sliding the locking tab towards the back of the
unit, to the
position.
OPEN
2.
UX300 M
ANUAL
Installing or Replacing SAM Cards
C
R
I
ARD
EADER
NSTALLATION
S
ETUP
15
G
UIDE