(13) Fusing is loose.
Print example
Wrong types of paper.
Paper creased.
Flawed heat roller or press
roller.
Defective pressure springs.
Defective fuser heater.
(14) Image is out of focus.
Print example
Drum condensation.
(15) Carrier leaking occurs.
Print example
Paper creased.
Y 114940 - 1
Causes
Check if the paper meets specifications, replace paper.
Setup of media
Practical use of half speed printing
Replace the paper.
Replace the fuser unit (see page 1-5-19).
Causes
Perform the drum refresh operation.
Causes
Replace the paper.
Each of following paper kinds are changed and printed.
A paper setup of a printer is changed.
A setup of a driver is changed.
By basic setup, the kind of paper is made "CUSTOM 8".
1-4-30
Service Manual
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
Menu
Paper Settings
Press the [OK] key.
Media Type Set.
Press the [OK] key.
CUSTOM 8
Paer Weight
Normal 3
Press the [EXIT]
Press the [OK] key.
Press the [OK] key.
key.