LED Information
POWER The CradlePoint AER 2100 must be powered using an approved 12V DC power source.
•
Green = Powered ON.
•
No Light = Not receiving power. Check the power switch and the power source connection.
•
Flashing Amber = Attention. Open the administration pages (see page 10) and check the router status.
1
2
1
2
ETHERNET WAN Indicates information about a data source connected to the Ethernet WAN port.
•
Blue = Connected to an active Ethernet WAN interface.
2.4G
5G
WiFi BROADCAST These two LEDs indicate activity on the WiFi broadcast for both the 2.4 GHz and 5
GHz bands.
•
2.4G (green) = 2.4 GHz WiFi is on and operating normally.
•
5G (blue) = 5 GHz WiFi is on and operating normally.
SIGNAL STRENGTH Blue LED bars indicate the active modem's signal strength.
EC
•
4 Solid Bars = Strongest signal.
•
1 Blinking Bar = Weakest signal. (A blinking bar indicates half of a bar.)
metal-Thames Graphics Design
Rev:1.0 color& Graphics
Designer:ME Department
WRT-C8B
Date:Jun.24.2013
12