Accessing The Administration Pages - Cradlepoint AER2100 Quick Start Manual

Getting Started
(continued)
5. Connect to a computer or other network equipment.
In order to access the CradlePoint AER 2100, establish a connection to the router. Connect wirelessly to the WiFi broadcast or
with an Ethernet cable connected to your computer and then plugged into one of the Ethernet LAN ports (numbered 1–4).
The default WiFi network name broadcast is "2100-xxx", where "xxx" is the last three characters of your router's MAC
address (this is the SSID on the product label). To connect to the WiFi, you will need to input the DEFAULT PASSWORD
when prompted. The
DEFAULT PASSWORD

Accessing the Administration Pages

Once you are connected, open the CradlePoint AER 2100's GUI-
based administration pages to make configuration changes to your
router.
1. Open a browser window and type "cp/" or
"192.168.0.1" in the address bar. Press ENTER/
RETURN.
2. When prompted for your password, type the eight character
DEFAULT PASSWORD found on the product label.
is provided on the product label found on the bottom of your router.
Default Password:440c1fc1
Serial No.:MM130167900418
MAC Address: 0030440c1fc1
SSID: 2100-fc1
Made in Taiwan
Part No.: 2100
H/W ver.1.0
www.cradlepoint.com
Model No.:
FCC ID:UXX-S4A340A
IC:6921A-S4A340A
12V 3A (max 4A)
10
S4A340A
RoHS