Table of Contents
Advertisement
Chapter 1
LED
GPON
LOS
LAN
Wi-Fi
WPS
Note:
If the GPON LED is off or the LOS LED is on or flashing, check your Internet connection first. Refer to
GPON Router
for more information about how to make Internet connection correctly. If you have already made a
right connection, contact your ISP to make sure your Internet service is available now.
1 2 2
Back Panel
The router's back panel provides connection ports, Power button and antennas. Refer
to the following for detailed instructions.
Item
GPON
LAN (1-4)
Power On/Off
Status
On
The router is registered with the ISP.
Flashing
The router is trying to register with the ISP.
Off
The router is not yet registered with the ISP.
On
The router is unable to transmit optical signal.
Flashing
No optical signal is received or the received signal is too weak.
Off
The router is receiving optical signal properly.
On
A device is connected to the LAN port.
Flashing
The LAN port is transmitting or receiving data.
Off
No device is connected to the LAN port.
On
The wireless radio band is enabled.
Flashing
The router is transmitting or receiving data via Wi-Fi.
Off
The wireless radio band is disabled.
The LED stays on for 30 seconds when a WPS connection is
On/Off
established, then turns off.
Flashing
WPS connection is in progress. This may take up to 2 minutes.
For connecting the router to the Internet. Connect the port to the splitter via
a fiber line. For details, please refer to
For connecting the router to your PC or other Ethernet network devices.
The switch for the power. Press it to power on or off the router.
Indication
Description
Connect Your GPON
Connect Your
Router.
4
Advertisement
Table of Contents
