Use Wps For Wireless Connection - TP-Link TX-W6961N User Manual

Chapter 10
1 Go to Advanced
2 Select an option from the
None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2
uses the newest standard and the security level is the highest. We don't recommend
that you change the default settings unless necessary.
10 3 2

Use WPS for Wireless Connection

You can use WPS (Wi-Fi Protected Setup) feature to add a new wireless device to your
existing network quickly.
Method 1 Use the WPS Button
Use this method if your client device has a WPS button.
1
Press the WPS button on the router for 1 second.
2
Press the WPS button of the client device directly.
3 The WPS LED flashes for about 2 minutes during the WPS process.
4 When the WPS LED is on, the client device has successfully connected to the router.
Method 2 Enter the client device's PIN on the router
1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2 Go to Advanced
3 Keep the default WPS status as Enabled and select the
4
Enter the client device's PIN in the field on the above WPS screen. Then click the
Connect button.
5 Connect successfully
device has successfully connected to the router.
> Wireless >Wireless Settings
Security drop-down list. The router provides four options,
> Wireless > WPS page.
will appear on the above screen, which means the client
page.
PIN Code radio button.
45