Table of Contents
Advertisement
Chapter 10
Method 3 Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2
Go to
Advanced
3
Keep the Router's PIN status as enabled. Take a note of the Current PIN of the router.
You can also click the
4
On the client device, enter the router's PIN. (The default PIN is also printed on the
label of the router.)
5
The WPS LED flashes for about two minutes during the WPS process.
6
When the WPS LED is on, the client device has successfully connected to the router.
Note:
1. The WPS LED on the router will light on for 30 seconds if the device has been successfully added to the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.
10 3 3
Schedule Your Wireless Function
You can automatically turn off your wireless network at the time when you do not need
the wireless connection.
1
Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2
Go to
Advanced
3
Toggle on the button to enable the Wireless Schedule feature.
>
Wireless
>
WPS
page.
Generate
button to get a new PIN.
>
Wireless
>
Wireless Schedule
page.
46
Advertisement
Table of Contents
