Viessmann VITOCROSSAL 200 Service Instructions Manual page 7

Steps - commissioning, inspection and...
Commissioning steps
Inspection steps
Maintenance steps
• •
22. Checking the ignition and ionisation electrodes......... 24
• •
23. Closing the boiler door.................................................. 25
• •
24. Cleaning the burner........................................................ 25
•
25. Installing the burner....................................................... 26
• •
26. Checking both gas train valves automatically for gas
• •
27. Checking and replacing (if required) the filter
• • •
28. Checking all gas connections for tightness................ 26
• • •
29. Checking the rotary damper setting............................. 27
•
30. Implementing final tests................................................. 28
• •
31. Checking the water quality............................................ 29
• • •
32. Checking the function of safety valves
• •
33. Expansion vessel and system pressure....................... 30
• •
34. Checking the gaskets/seals on the flue gas side........ 31
• •
35. Checking the mixer for ease of operation and leaks... 32
• • •
36. Checking the thermal insulation for firm seating
•
37. Checking the flue gas system for leaks
• •
38. Checking the ventilation air apertures in the
•
39. Instructing the system user........................................... 32
•
40. Operating and service instructions.............................. 32
tightness.......................................................................... 26
elements in the gas line
installation room (only for open flue operation)
Commissioning, inspection, maintenance
(cont.)
Page
7