Burner control unit
Status Service
Status Service
Status Service
Status Service
Status Service
Status Service
Status Service
(cont.)
Quality of the ionisation current
Note
A value of > 50 for the quality of the ion-
isation current is very good. If the value
is lower, check the ionisation current,
which should then be > 3
check the ionisation cable and ionisation
electrode.
Start counter with reset, 1 digit
Start counter with reset, 100 digit
Start counter with reset, 1000 digit
Hours run meter with reset, 1 digit
Hours run meter with reset, 100 digit
Hours run meter with reset, 1000 digit
μ A. Otherwise
37