Item 4
Description:
On NANO operating system, you cannot install a firmware or driver DUP if it is in .exe format.
Versions/Systems affected
All
Item 5
Description
Deployment of the Windows server operating systems (OS) using Lifecycle Controller (LC) may fail with one of the following
messages:
•
Windows installation cannot continue because a required driver could not be installed.
•
Product key required
•
Windows cannot find the software license terms.
This happens when the Windows setup copies the drivers to the scratch space (X: drive) and the scratch space becomes full.
Resolution
To resolve this issue, do any of the following:
•
Remove all the installed add-on devices before starting the OS installation.
After the OS installation is complete, connect the add-on devices and manually install the remaining drivers using Dell Update
Packages (DUPs).
•
To avoid physically removing the hardware, disable the PCIe slots in the BIOS.
•
Increase scratch space size beyond 32 MB using DISM set-scratchspace command when creating customized
deployment. See http://technet.microsoft.com/en-us/library/dd799261(v=ws.10).aspx for more details.
Platforms Affected
This issue may occur on 12th and 13th generation Dell PowerEdge servers.
Item 6
Description:
The SSM task header displays 'RAID-Update' for both RAID and non-RAID updates.
Resolution:
No action is required.
Versions Affected:
All
Dell tracking: JIT-29065
Item 7
Description:
On Dell PowerEdge T630 servers, all PCIe SSDs are reported on the Physical Disk page of iDRAC GUI but on the Enclosure
Summary page, the PCIe SSD connected to slot 0 is not reported.
17