System Board - HP Elite x3 Maintenance And Service Manual

System board

Description
System board, includes audio board and thermal pads:
● For use in North America, equipped with Windows 10 Mobile, Snapdragon 820 quad core processor,
4 GB, 64 G eMMC
● For use in the rest of the world, equipped with Windows 10 Mobile, Snapdragon 820 quad core
processor, 4 GB, 64 G eMMC
Before removing the system board, follow these steps:
1. Disconnect the power from the device by unplugging the power cord from the device.
2. Turn off the device. If you are unsure whether the device is off, turn the computer on, and then shut it
down through the operating system.
3. Disconnect all external devices from the device.
4. Remove the card reader tray (see
5. Remove the end cap (see
6. Remove the display panel assembly (see
7. Remove the chassis (see
8. Remove the rear camera (see
Remove the system board:
1. Remove the two M1_L1.4 Phillips screws (1) securing the USB flex retaining bracket.
2. Remove the USB flex retaining bracket (2). The bracket is part of the Metal Kit, part number
903686-001.
3. Use a spudger to gently disconnect the USB flex (3) from the system board.
32 Chapter 5 Removal and replacement procedures
Card reader tray on page
End cap on page 18).
Display panel assembly on page
Chassis and battery removal on page
Rear camera on page
17).
19).
27).
30).
Spare part number
903660-001
905637-001