Display Panel Assembly - HP Elite x3 Maintenance And Service Manual

Reverse the steps to replace the end cap.
NOTE: A small amount of glue may be required to secure the end cap. Contact your HP service contact for
additional details.

Display panel assembly

Description
5.96 inch, WQHD 2560x1440 AMOLED, touchscreen display panel assembly, includes OLED panel,
laminated touch sensor, lens adhesive, and display flex
Display pressure-sensitive adhesive
NOTE: A glue machine, glue, and repair fixtures are required. Contact your HP service contact for
additional details.
Before disassembling the device, follow these steps:
1. Disconnect the power from the device by unplugging the power adapter cord from the device.
2. Turn off the device. If you are unsure whether the device is off, turn the device on, and then shut it down
through the operating system.
3. Disconnect all external devices from the device.
4. Remove the card reader tray (see
5. Remove the end cap (see
Remove the display panel assembly:
CAUTION: The display panel is fragile. Before turning the display panel assembly upside down, make sure
the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can
result in damage to the display panel.
Card reader tray on page
End cap on page 18).
Spare part number
903687-001
904362-001
17).
Display panel assembly 19