Eco Dect; Setting The Alarm Clock - Siemens Gigaset C385 Instruction Manual

ECO DECT

You are helping to protect the environ-
ment with your C385.
Reduced energy consumption
Your telephone has an energy-saving
adapter plug and uses less energy.
Reduced transmission power
The transmission power of your telephone
is automatically reduced.
u
The handset's transmission power is
reduced depending on its distance to
the base station.
u
The transmission power at the base sta-
tion is reduced to virtually zero when
only one handset is registered and is
standing in the base station.
You can reduce the transmission power of
the handset and base station even further
by using Eco Mode:
u
Eco Mode
80% transmission power reduction in
standby and talk modes.
Activating/deactivating Eco Mode:
¢ ¢
Settings
§Menu§
¢
Features Eco Mode
Press the display key
§OK§
‰
( = on).
Status displays
Display icon
Reception strength:
Ò Ñ i Ð
– Low to Good
|(flashes)
– No reception
Icon green Eco Mode enabled
Please note
Activating Eco Mode reduces the
range of the base station.
¢
Base Additional

Setting the alarm clock

Precondition: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock
¢
Alarm Clock
§Menu§
(‰ = on)
After you activate the alarm clock, the
menu for setting the wake-up time opens
¢
automatically ( page 37).
If the alarm clock is set, the wake-up time
appears with the ¼ icon in the display
instead of the date.
Setting the wake-up time
¢
Alarm Clock
§Menu§
~
Enter the wake-up time in
hours and minutes, then press
.
§OK§
When the alarm clock rings...
Alarm repeats after 5 minutes
Press the display key or any
§Snooze§
key.
If you press three times, the alarm
§Snooze§
clock switches off for 24 hours.
Turning off the alarm clock for 24 hours
Press the display key.
§Off§
ECO DECT
page 15).
¢
Activation
¢
Wake up time
37