Last Number Redial List; Opening Lists With The Message Key; Eco Dect - Siemens Gigaset A58H User Manual

Using a number from the directory
In some operating situations you can open
the directory to copy a number, for example.
Your handset must be in the idle status.
s
Open the directory.
q
Select entry.
§OK§
Press the display key.
Select function with q.

Last number redial list

The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers is
in the directory, the corresponding name
will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again. The
number is dialled.
Managing entries in the last
number redial list
c
Press the key briefly.
s
Select entry.
§Menu§
Open menu.
The following functions can be selected with
q:
Use Number (as in the directory,
¢
page 22)
Copy to Directory
Copy an entry to the directory
¢
( page 21).
Delete Entry (as in the directory,
¢
page 22)
Delete List (as in the directory,
Opening lists with the
message key
An advisory tone sounds as soon as a
new message arrives in a list. The f key
flashes (it goes off when the key is pressed).
In idle status, the display shows an icon for
the new message.
If you press the message key f, you access
the lists that contain new messages.

ECO DECT

You are helping to protect the environment
with your Gigaset handset.
Reducing energy consumption
By using an energy-saving power supply,
your telephone consumes less power.
Reducing radiation
(dependent on base)
The radiation can only be reduced if your
base supports this function.
The transmission power of your telephone is
distance to the base.
You can reduce the radiation of the handset
and base even further by using Eco Mode or
Eco Mode+. For further information, please
refer to your base user guide.
¢
page 22)
ECO DECT
reduced depending on the
23