Eco Dect; Setting The Alarm Clock; Using A Handset As A Room Monitor - Siemens E49H User Manual

ECO DECT

You are helping to protect the environ-
ment with your Gigaset E49H.
Reduced energy consumption
Your telephone has a power-saving
adapter plug and uses less power.
Reduced transmission power
(depending on the base station)
The transmission power can only be
reduced if your base station supports
this function.
The transmission power of your telephone
is automatically reduced depending on
the distance to the base station.
You can reduce the transmission power of
the handset and base station even further
by using Eco Mode or Eco Mode+. For fur-
ther information, please see your phone's
user guide.

Setting the alarm clock

Precondition: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v ì
¤
Change multiple line input:
Activation
Select or Off.
On
Time
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤
Save the changes.
You will see the ì icon.
page 11).
A wake-up call with selected ringer
¢
( page 29) is signalled on the handset.
The wake-up call sounds for 60 seconds.
ì is shown in the display. If no key is
pressed, the wake-up call is repeated
twice at five minute intervals and then
switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Using a handset as a
room monitor
If the room monitor is activated, a previ-
ously saved destination number is called
as soon as a set noise level is reached. You
can save an internal or external number in
your handset as the destination number.
The room monitor call to an external
number is terminated after approximately
90 seconds. The room monitor call to an
internal number (handset) is terminated
after approximately 3 minutes (depending
on the base station). When the room mon-
itor is activated, all keys except the end call
key are locked. The handset's speaker is
muted.
When the room monitor is activated,
incoming calls to the handset are indi-
cated without a ringer and are only
shown on the screen. The display and key-
pad are not illuminated and advisory
tones are also turned off.
ECO DECT
25