Table of Contents
Advertisement
3 Web-based Interface Setup and Startup
1. To access web-based user interface on the DAS-3224/3248, one has to connect uplink port
and enter URL below at web browser.
Uplink #1 (UP1):
Uplink #2 (UP2):
2. If you first time login the web-based user interface, the default User name/Password is:
User Name:
admin
Password:
admin
3. Click on
. You are now ready to configure DAS-3224/3248 IP DSLAM using web-based
user interface.
Web-based user interface provides a series of web pages that you can use to setup and
configure the DAS-3224/3248 IP DSLAM. These pages are organized into four main topics.
You can select each of the following topics from the menu on the left-hand side of the main
window:
-
System: the System section lets you carry out system commands like Firmware
Update, System Reboot, Save Config, and Recall Config.
-
Configuration: information about the current configuration of various system features
with options to change the basic configuration.
-
Advanced: information about the current configuration of various system features with
options to change the advance configuration.
-
Status: Information about the current setup and status of the system.
-
Maintenance: show the statistics of the interface.
The changes made via web pages will immediately reflect in all elements of the network.
The exact information displayed on each web page depends on the specific configuration
that you are using. The following sections give you a general overview of the setup and
configuration details.
http://192.168.100.111
http://192.168.1.111
11
Advertisement
Table of Contents
