Table of Contents
Advertisement
Here need to add more information for above figure.
Field
Port ID
PVC
Admin Status
Accept Frame type
Default SVID
Default Priority
Default Priority Mode
Learning Mode
Port Type
3.2.2.2
XVID
This page displays the list of all CVIDs for any specific ports. You can transfer the CVID to
predefined SVID/CVID. Click CVID under the Configuration menu and display the page
below.
Description
The bridge port ID. Valid values: 1...26 (1...24: DSL, 25...26: eth)
Permanent Virtual Connection ID
Show the port disable and enable status
All: forward tagged/untagged packet by default
Tagged: Forward Tagged packet
Untagged: Forward Untagged packet
Service VLAN ID, which is used to be the default Service VLAN ID.
Valid values: 1...4093
Set 802.1p value for the port, valid value: 0-7
Untagged :mean no 802.1p priority tag traffic
All: forward any 802.1p priority tag traffic
The state of learning on this bridge port, which is used to learn VLAN
ID. Valid values: disable / enable
Type of the port: User or TLS (Transparent Line Service)
21
Advertisement
Table of Contents
