Table of Contents
Advertisement
Use the dropdown box next to enable or disable the sender.
Note:
In order to make Syslog Sender Enable to be effective, user needs to set the Log
Threshold under the System Info to be a non-zero value.
User can also create or delete the Syslog sender by clicking the "Delete" or "Create"
buttons. Press "Create" button to display the following image.
3.1.7.2
Syslog Log
This page lists the entire system event log. User will be able to check the event history
under this section. User can click "Reload" to refresh the page for updated events or click
"Reset" to clear the past events. To display the following page, simply click Syslog Log of
the System Log under the System menu.
3.1.8
Image List/Selection
This page allows the user to display repository image version and to change repository.
User can simply to check Select option next to the desired image version and click "Apply"
to change the image version. Click on the Image List under System menu to display the
following page.
18
Advertisement
Table of Contents
