Led Indicators; Figure A-2 Front Panel Indicators; Table A-3. Front Panel Indicators - P-Com AirPro Gold Hardware Installation Manual

S P E C I F I C A T I O N S
A
General Specifications
L E D I N D I C A T O R S
Table A-3 Front Panel Indicators
Name Color
Steady illumination of LEDs indicates the strongest/highest quality of the receive signal.
Sequential illumination of all 10 LEDs indicates radio initialization self-test is in progress.
Blinking of all 10 LEDs in addition to audible alarm indicates Configuration Reset DIP switch is
ON and that the radio initial configuration and manufacturing image are selected for next reboot.
RSSI
Green
Blinking of the 1st of the 10 LEDs in addition to audible alarm indicates the wrong RF channel is
set on the DIP switches.
Blinking of the 3rd of the 10 LEDs in addition to audible alarm indicates that digital board
initialization has failed.
ALARM
Red ON = Major event in the link (including remote units fail).
LINK
Green ON = Link with far end unit/units is established.
E
THERNET
Green ON = Connection with Ethernet segment is established
L
INK
E
THERNET
Yellow ON = Activity on Ethernet segment
A
CTIVITY
DATA TX
Yellow ON = Unit tranmits the Data frame (the Control frames are not)
POWER Yellow ON = power to the radio is on
A-4
net
RS232

Figure A-2 Front Panel Indicators

Alarm
Link
Ethernet Link
Ethernet Activity
Data TX
RSSI
Power
APG2_007
Function
P-Com AirPro Gold