Rear Panel; Product Features; Figure 1-3 Airpro Gold Rear Panel - P-Com AirPro Gold Hardware Installation Manual

R E A R P A N E L
1
MAC ADDRESS:
MADE IN USA
2

Figure 1-3 AirPro Gold Rear Panel

Hardware Installation Guide
3
ANT
4
The AirPro Gold rear panel (see Figure 1-3) includes:
➀
Regulatory label
➁
MAC Address Label
➂
— Connector for the antenna.
ANT
➃
—I/O slot supports different data interfaces.
I/O MODULE
➄
AC Power cord connector— For AC power cord
➅
AC power ON/OFF rocker switch
➆
—Grounding stud
GND
P R O D U C T F E A T U R E S
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AirPro Gold interconnects computer LANs at geographically dispersed
offices, warehouses, and other sites. Using robust spread spectrum
technology that resists noise and interference, AirPro Gold can be
deployed quickly, since no license is required in many countries. Where
wired WAN solutions are costly or not available, AirPro Gold provides a
solution to support geographically dispersed enterprises and network
service providers.
P R O D U C T O V E R V I E W

Product Features

5 7
~
100–240 V
0.5–0.2A
50/60 Hz
GND
6
APG2_010
1-5