Front Panel; Figure 1-2 Airpro Gold Front Panel - P-Com AirPro Gold Hardware Installation Manual

P R O D U C T O V E R V I E W
1
Product Description
F R O N T P A N E L
1

Figure 1-2 AirPro Gold Front Panel

1-4
Ethernet
RS232
2 3 4 5
The AirPro Gold front panel (see Figure 1-2) includes:
➀
—RJ-45 jack for Ethernet connection (10/100 base-T);
ETHERNET
illuminated green LED indicates unit sees Ethernet connection, OFF
indicates no connection; illuminated yellow LED indicates no traffic on
the Ethernet bus, flashing indicates traffic on the bus
➁
—RS-232 port for direct connection to a terminal or external
RS232
telephone modem
➂
12 up/down (ON/OFF) toggle switches for manual
DIP SWITCHES—
RF configuration (under removable metal plate)
➃
—7-element LED bar that illuminates during normal operation
RSSI
to indicate the quality of the receive signal; sequential illumination of
each LED during startup indicates that the initialization self-test is in
progress; no illumination of the LEDs at the end of startup indicates
successful completion of self-test
➄
Front Panel LED Indicators
—Red LED illuminates when major events in the link
ALARM
(including remote units fail).
— Green LED illuminates when the link with the far end unit/units
LINK
is established.
—Green LED illuminates when the unit indicates
ETHERNET LINK
that connection with the Ethernet segment is established.
—Yellow LED illuminates when there is
ETHERNET ACTIVITY
activity with the Ethernet segment.
—Yellow LED illuminates when the unit transmits the Data
DATA TX
frame (the Control frames are not indicated).
—Yellow LED illuminates when unit power is ON.
POWER
Alarm
Link
Ethernet Link
Ethernet Activity
RSSI Data TX
Power
APG2_008
P-Com AirPro Gold