Bosch AVIOTEC IPSTARLIGHT 8000 Operation Manual page 35

AVIOTEC IP starlight 8000
Alarm in:
Use the alarm input to connect external alarm devices such as door contacts or sensors:
–
–
A zero potential make-contact or switch can be used as the actuator (use a bounce-free
contact system).
Pin
1
4
Pin
2
5
Alarm out
Use the alarm output for switching external devices such as lamps or sirens.
Alarm output switching capability:
–
Pin
3
6
The maximum wire diameter is 18-28 AWG, UL 16-28 AWG for both stranded and solid; cut
back 7 mm (0.28 in) of insulation.
Connection to a fire alarm control panel
The alarm output of the camera can be connected to a fire alarm control panel.
The camera alarm output is triggered by a relay that is normally open. In case of alarm the
relay is closed.
Bosch Sicherheitssysteme GmbH
TTL logic, +5 V nominal, +40 VDC max, DC coupled with 50 kOhm pull-up to +3.3 V.
Configurable as active low or active high.
Alarm socket
Alarm in 1
Ground
Alarm socket
Alarm in 2
Ground
Max. voltage 30 VAC or +40 VDC. Max. 0.5 A continuous, 10 VA.
Alarm socket
Alarm out
Operation manual
Camera integration | en 35
2017.06 | 6.0 | F.01U.318.200