Changing Image File Name Prefix - Fluke TiR2 User Manual

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual

Changing Image File Name Prefix

To change the prefix used in the saved image name:
This change affects only new images saved to the memory card and
does change the prefix of previously saved images.
1. Tap F.
2. Use the mouse controller to position the pointer over Camera Settings on
the popup menu.
3. Tap E.
4. Position the pointer over the Files tab and tap E.
5. Position the pointer over Edit and tap E to open the Prefix Editor.
6. Select and click on up to five alphanumeric characters one at a time. Tap
to accept setting change and return to Camera Settings window.
7. Tap again to return to scan target mode.
info@Fluke-Direct.com
6-8
Note
Fluke-Direct
.com
1.888.475.5235