Table of Contents
Advertisement
3
When correct password is entered, "Management function" screen is
displayed.
To select the function to be controlled by [Management], select [Edit]
with pressing the [Cursor button (Up/Down)], and press the [Enter
button].
"Management select" screen is displayed.
Management function
Mo 10:00AM
Edit
Back:
Setting:
4
Select the target function with the [Cursor button (Up/Down)] and
press the [Enter button]. Then the setting field for the restriction set-
ting is displayed.
Management select
1/2
[
]
Mo 10:00AM
Economy
Set temp.auto return
Set temp.range
On timer
Off timer
Back:
Setting:
Select the setting with the [Cursor button (Up/Down)], and press the [Enter
button].
Management select
1/2
[
]
Mo 10:00AM
Economy
Set temp.auto return
Set temp.range
On timer
Off timer
Cancel:
OK:
If there is another setting to be changed, you can continue the configura-
tion.
Management select
Economy
Set temp.auto return
Set temp.range
On timer
Off timer
Back:
To complete the setting, press the [Cancel button].
Functions marked check in "Management select" screen are listed in "Man-
agement function" screen.
Management function
Economy
Set temp. range
On timer
Back:
5
In "Management function" screen, you can change the detailed setting
on each function.
For how change the setting, refer to each function setting in
"3. FUNCTION SETTING" in the operating manual.
Management function
Economy
Set temp. range
On timer
Back:
Management select
1/2
[
]
Mo 10:00AM
Economy
Set temp.auto return
Set temp.range
On timer
Off timer
Back:
Setting:
Management select
1/2
[
]
Mo 10:00AM
Economy
Set temp.auto return
Set temp.range
On timer
Off timer
Cancel:
OK:
Management select
1/2
[
]
Mo 10:00AM
Economy
Set temp.auto return
Set temp.range
On timer
Off timer
Back:
Setting:
1/2
[
]
Mo 10:00AM
Setting:
Mo 10:00AM
Edit
Off
Disable
Disable
Setting:
Mo 10:00AM
Edit
Off
Disable
Disable
Setting:
-Note-
If the function you are selecting is restricted by [Management]
function, following message is displayed in the operation guidance
display. The message is displayed constantly during the management
function is enabled.
Back:
XXXXXX
12. OTHERS
12.1. Error code
If an error occurs, the power indicator (green) blinks and the following
display will be shown.
If "Error" is displayed, immediately stop the air conditioner operation, and
consult authorized service personnel.
•
When there is an error on this remote controller:
Error
Remote controller
Code : XXXXXX
Error code
Er 12.1
•
Wired remote controller communication error
EE 1c
•
Incompatible indoor unit is connected
Er 15.4
•
Indoor unit date acquisition error
EE 1d
•
Primary unit / Secondary unit setting error
Er CC.1
•
Remote controller sensor error
EE CC.1
•
When there is an error on the indoor unit:
Error
Error
R.C. address : 00
R.C. address : 00
Code : XXXXXX
Code : Er 41.1
Monitor
Monitor
Restricted by the management function
XXXXXX
Mo 10:00AM
Error code
Contents
Mo 10:00AM
Mo 10:00
Address number of the
relevant indoor unit
Error code
En-10
Hide quick links:
Advertisement
Table of Contents
