Flash-To-Pass; Windshield Wipers - Chevrolet T-Series Owner's Manual

Flash-to-Pass

This feature lets you use the high-beam
headlamps to signal a driver in front of you that
you want to pass. It works even if the headlamps
are in the automatic position.
To use this feature, pull the multifunction lever
toward you, then release it.
If the headlamps are in the automatic position or
on low beam, the high-beam headlamps will
turn on. They'll stay on as long as you hold the
lever toward you. The high-beam indicator on the
instrument panel cluster will come on. Release
the lever to return to normal operation.

Windshield Wipers

The windshield wipers are controlled by the lever
located on the right side of the steering column.
The windshield wipers have these positions:
(OFF): Turn the knob at the end of the
9
windshield wiper lever to turn off the wipers.
- - - (Intermittent): Turn the knob to the
intermittent setting to delay the wiper speed. This
can be very useful in light rain or snow. When
you turn the knob to this setting, you can also set
the wiper speed. See the following text for
more information.
89