Chevrolet T-Series Owner's Manual page 238

3. Put on the wheel nuts.
4. Finger-tighten the nuts.
6. Tighten the nuts to 400 lb ft (542
8-hole stud or 480 lb ft (650
stud, using the following diagrams.
238
5. Oil the surfaces (B)
between the nuts (C)
and washers (A).
Do not oil the studs
or the threads of
the nut.
) if an
Y
Y ) if a 10-hole
8-Hole
10-Hole (Front) 10-Hole (Rear)