Tape Operation/Recording; Tape Playback; General Information On Recording - Philips FWD796/21 User Manual

IMPORTANT!
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).

Tape playback

1
Press 5 to open the tape deck door.
2
Insert a recorded tape and close the tape door.
Load the tape with the open side down and the
full spool to the left.
3
Press TAPE (TAPE 1•2) or TAPE1/2 on the
remote control repeatedly to select tape deck 1
or tape deck 2.
The selected tape deck number is displayed.
4
Press 38 to start playback.
Stopping playback
Press 7.
Changing the playback mode
Press AUTO REPLAY repeatedly to select:
PLAY, REPLAY. The default setting is PLAY.
REPLAY ...................... the tape will rewind
PLAY .............................. the selected side will be
automatically at the end of
playback and replay. It will
replay up to max. 10 times
or until you press 9.
played once.

Tape Operation/Recording

Rewinding or forwarding fast when
playback is stopped
1
Press 1 or ¡ on the front panel or on the
remote control.
2
Press 7 when you reach the desired passage.
Resetting tape counter number
In stop mode, press 7.
General information on
recording
If you don't intend to record via the
microphone, unplug it to avoid unwanted
recording source.
For recording, only use tape of IEC type I(normal
tape).
The recording level is set automatically,
regardless of the position of the Volume, Vocal,
Key control and so forth.
The type is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for seven seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
Press REC in Disc, Tape, Tuner or AUX/Game
mode, "PLEASE CHECK TAPE 2" will scroll
on the display if there is no recordable tape in
tape deck 2.
39