Using The Pl Defeat Feature; Using The Digital Ptt Id Feature; Using The Smart Ptt Feature (Conventional Only); Accessing General Radio Information - Motorola APX 7500 O5 User Manual

Using the PL Defeat Feature

This feature allows you to override any coded squelch (DPL or
PL) that might be preprogrammed to a channel. The radio will
also unmute to any digital activity on a digital channel.
Procedure:
Place the preprogrammed PL Defeat switch in the PL Defeat
position. You hear any activity on the channel.
OR
The radio is muted if no activity is present.
Note: When this feature is active, the Carrier Squelch status
indicator is displayed.

Using the Digital PTT ID Feature

This feature allows you to the radio ID (number) of the radio
from whom you are currently receiving a transmission. This ID,
consisting up to a maximum of eight characters, can be viewed
by both the receiving radio and the dispatcher.
Your radio's ID number is also automatically sent every time the
PTT button is pressed. This is a per-channel feature. For digital
voice transmissions, your radio's ID is sent continuously during
the voice message.

Using the Smart PTT Feature (Conventional Only)

Smart PTT is a per-personality, programmable feature used in
conventional radio systems to keep radio users from talking
86
over other radio conversations.
English
When smart PTT is enabled in your radio, you cannot transmit
on an active channel.
If you try to transmit on an active smart-PTT channel, you hear
an alert tone, and the transmission is inhibited. The LED lights
up solid yellow to indicate that the channel is busy.
Three variations of smart PTT are available:
Mode Description
Transmit Inhibit on You cannot transmit if any traffic is
Busy Channel with detected on the channel.
Carrier
Transmit Inhibit on You cannot transmit on an active channel
Busy Channel with with a squelch code or (if secure-
Wrong Squelch equipped) encryption key other than your
Code own. If the PL code is the same as yours,
the transmission is not prevented.
Quick-Key Override This feature can work in conjunction with
either of the two above variations. You
can override the transmit-inhibit state by
quick-keying the radio. In other words, two
PTT button presses within the
preprogrammed time limit.

Accessing General Radio Information

Your radio contains information on the following:
•
Radio Information